Q: Is it safe to use Snö X on a ceramic coating?
A: Yes. Whilst Snö X is an alkaline cleaner it can be used safely on fully cured ceramic coatings but we'd suggest keeping the dwell time low and rinsing thoroughly. Avoid using it on fresh ceramic coatings just to be safe. Remember that foams are generally weaker than liquid sprays as they are highly aerated. But never let a foam 'dry onto' the car, especially on sensitive or delicate finishes. The chemicals will be far more concentrated if the foam evaporates.
Q: How does Snö X compare to regular Snö or pH neutral snow foam?
A: Snö X offers more cleaning power than a pH neutral product like Snö because it is contains strong alkalis giving the product a high pH value. This makes it more aggressive in use. For even more cleaning power, try using regular Först as it is applied as a liquid, not a foam.
Q: Can I use Snö X for regular cleaning?
A: Whilst standard Snö is always best for regular cleaning, you may want to reach for Snö X during dirtier seasons like winter. Its powerful formula makes it perfect for tackling tough jobs. However, if your car has a sensitive or delicate finish (chrome window surrounds, anodised wheel nuts etc) then avoid using the product too much - or even at all - in these areas and rinse thoroughly with minimal or no dwell time. Strong chemicals should be used as sparingly as possible to get the job done.
Q: I have noticed chalky or milky deposits on dark paint or trim after use. What is this and how can I sort them out?
A: Strong chemicals can briefly weaken softer finishes during use, especially in hot conditions where they can dry out. Never let a strong product dry out and apply it to wet panels only to help avoid this. Once a soft finish (black powder coated/refinished wheels, black plastic trim are classic examples) has been weakened, alkali salts from the product and calcium carbonate (limescale) deposits from hard water can be trapped into the surface giving a milky, cloudy or chalky appearance. Assuming these are merely deposits and not physical etching, you can remove them with a polish (like Skara in our range), waterspot remover or mild acid, or even a microabrasive 'magic' sponge. If light chemical etching has occured, Skara will help to level the surface and bring back lustre and shine. Stronger etching may require harsher polishing techniques or even refinishing.
