product image

select caret down
Skip to content
Snöstorm Quick Release Nozzles - 5pc Spray/Jet for Pressure Washer Gun

Snöstorm Quick Release Nozzles - 5pc Spray/Jet for Pressure Washer Gun

In stock
Regular price £8.00
Tax included.
Title: Quick Release 5pc Nozzle Spray Jet Kit
Quantity

Love your Snöstorm Snow Foam Lance but tired of swapping it out each time? Just leave the quick release attached and swap out the foam lance for one of five different pressure washer gun nozzles - probably more than the original lance came with anyway! Add practicality, performance and convenience all at the same time with this five piece set of quick release nozzles:

  • Green nozzle: 25 degrees spray jet, the most popular for general detailing... a good mix of power and coverage.
  • White nozzle: 40 degrees spray jet for when you need more coverage and a gentler approach.
  • Yellow nozzle: 15 degrees spray jet, for more targeted contamination removal - caution here on stone chips and flaking lacquer, don't attack these along with the flies on the front bumper... this is about as aggressive a jet as you really need.
  • Red nozzle: 0 degrees needle spray jet - red for a reason, this is dangerous to use on paintwork, keep it for removing weeds in between paving blocks on your drive, that kind of thing.
  • Black nozzle: 65 degrees high flow low pressure nozzle, used for rinsing the car with more of a spout flow than a high pressure jet.

Please note: NO quick release female connector supplied; this kit uses the Quick Release connector found in the Snöstorm Snow Foam Lance. 

Convenience: This nozzle kit gives 5 different spray jets of different power and coverage, swapping out of the quick release connector easily (supplied with Snöstorm Snow Foam Lance).

Performance: Choose the right nozzle for the job, we'd opt for green or white for most applications but you will find your pressure washer delivering performance in entirely new ways when you switch between these different spray jets.

Practicality: Weed your block paving with the super aggressive red fitment, gently rinse bodywork with the low pressure black nozzle. And just click in the foam lance when you want some snow!

Attach Foam Lance Connector to Pressure Washer Gun: Using the correct adapter, connect the quick release female connector to your pressure washer gun.

Attach Nozzle to Quick Release Connector: Choose your selected nozzle and attach it to the female quick release, instead of attaching your snow foam lance. The male quick release fitting is the same on the nozzles, so they swap out easily. Just pull back on the brass ring on the female quick release to swap out nozzles.

Usage: Avoid using narrow high pressure jets on sensitive finishes; wider jet nozzles give better coverage at lower pressure. Never use very narrow jets on car bodywork.

Q: Do these work with all pressure washers?

A: These will work with most pressure washers, but the most powerful machines may experience too much back pressure due to the inlet (orifice) size of these spray nozzle fittings. If your pressure washer makes unusual noises or pulses then stop using these nozzles and check with the manufacturer of the machine before using these nozzles should you be concerned.

Q: Do these work with all quick release fittings?

A: They work with MOST quick release fittings found on the detailing market but there are so many fittings around, these may not be compatible with all female quick release connectors. These are made to work with the quick release found with our Snöstorm Snow Foam Lance.

Q: Should I avoid using some nozzles in certain circumstances?

A: Yes, the increased performance and power some of these nozzles give may be dangerous to paint and other parts of the car. Use wider nozzles for larger coverage and softer cleaning. Narrow nozzles focus cleaning power onto a smaller area and can be highly dangerous. USE CAUTION DURING OPERATION AND NEVER AIM PRESSURE WASHER JETS AT YOURSELF OR OTHERS.

Cart

Your cart is currently empty.

×